Reel Mowers HSCC User Manual
Page 5

OWNER’S MANUAL
Copyright © 2008
page 5
Hudson Sales & Engineering, Inc.
4. Grass
Catcher
Height
Adjustment
Bar
Catcher
Hooks
Slots in
Frame
Catcher
Hooks
1. Mower Unit
Figure 1
3. Upper Handle
7. Allen
Wrench
5. Blade Sharpening
Handle
8. Shoulder Bolts
(2 included)
Note:
Items not
shown at full scale.
9. Grass Catcher
Hardware
6. Handle Hardware
(bolt, washer, & nut)
(4 - Included )
9. Catcher Hardware
(bolt, plate, & nut)
(Plate - 2 Included)
(bolt & nut - 6 Included)
2. Lower
Handle
6. Handle
Hardware
SECTION II, PREPARATION FOR USE
After you have opened the box containing your mower, check for the following parts. Visually
inspect for any shipping damage. (Figure 1)
1. Mower unit
2. Lower Handle
3. Upper Handle
4. Grass Catcher
5. Blade Sharpening
Handle and ¾”
sockethead capscrew
6. Handle Hardware
7. Allen Wrench
8. Shoulder Bolts (2)
9. Grass Catcher
Hardware
Carefully remove the
parts from the carton. Set
the mower on a flat
surface. Place the grass
catcher over the hooks as
shown in Figure 1. Attach
the lower handle to the
mower with the two
provided shoulder bolts as
shown. Slide the upper
handle over the lower
handle until the bolt holes
line up. Attach the handle
with the four bolts as
shown.
For final assembly, see
pages 11 and 12.