Dukane DVP303A - Manual (Page 12)

5__Using the Digital Presenter
This chapter shows you the basic and advanced functions of the Digital Presenter as and
how to use the menu, the mouse, and the Presenter USB/RS232 interface.
5-1 Getting Started
For Presenting Printed Materials:
1. Power on the Digital Presenter. (The lamp arm should be ready before you turn on
the power)
2. Place the document or object on the platform. While observing the image on the
monitor, adjust the zoom or arm to obtain the optimal size.
3. Press the AF (Auto Focus) button to focus document or object.
For Viewing Transparencies:
1. Start the menu by pressing the Menu button on the remote control.
2. Select Lamp Æ Backlight
3. Place the object on the stage. While observing the image on the monitor, adjust
the zoom or arm to obtain the optimal size.
For Viewing remote object:
1. Pull out the Close-Up Lens, as shown in Figure 5-1.
Figure: 5-1
2. Rotate the camera head.
3. While observing the image on the monitor, adjust the
zoom or arm to obtain the optimal size.
5-2 Using the OSD Menu
Showing the Main Menu
Option 1:Connect a PS2 mouse to the rear connector of the PRESENTER machine.
Right click to show the main menu.
Option 2:Open the Main Menu by pressing the Menu button on the remote control.
Starting/Exiting the Menu
To start the menu:
Option 1:Press the Menu button on the remote control to start or exit the menu.
Option 2:When you are using a PS2 mouse, right click to start or exit the menu.
To exit the menu: The menu will be automatically turned off when not being activated
for 30 seconds.
Adjusting and Confirming the Settings
Move your mouse to highlight the option your want to select. If you are using the
remote control, show the Main Menu and highlight the option you want to select by
pressing , , ◄, or ► buttons.
Option 1:If you want to confirm a setting press the Enter button on your remote control
or click the mouse to confirm the option you choose.
Option 2:If you want to exit the setting press the Menu button on your remote control
or click the right button on your mouse to return to the previous menu.
10