Troubleshooting, Specifications, Legal notices – Dynex DX-DPF9 User Manual
Page 5: Fcc part 15, Fcc warning, Dhhs and fda safety certification, Canada ices-003 statement, Rss 310 statement, Copyright, Image use restrictions

Troubleshooting
5
Troubleshooting
Specifications
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to 
the following two conditions: (1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may cause 
undesired operation.
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance 
with the FCC Rules could void the user’s authority to operate this equipment.
DHHS and FDA safety certification
This product is made and tested to meet safety standards of the FCC, requirements and 
compliance with safety performance of the U.S. Department of Health and Human 
Services, and also with FDA Radiation Performance Standards 21 CFR Subchapter J.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
RSS 310 statement
To reduce potential radio interference to other users, the antenna type and its gain 
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more 
than that permitted for successful communication.
Copyright
© 2007 Dynex. DYNEX
®
is a registered trademark of Best Buy Enterprise Services, Inc.
Other brands and product names are trademarks or registered trademarks of their 
respective holders. Specifications and features are subject to change without notice or 
obligation.
For service and support call 1-800-305-2204.
Image Use Restrictions
Use of the images pre-loaded on your digital picture frame is limited to personal, 
non-commercial use. Consumer may not modify, duplicate, distribute, retransmit, 
republish, reproduce, or create derivative works from the pre-loaded images.
Problem
Solution
The digital picture frame 
won't turn on.
The adapter is not securely connected 
to your picture frame or the power 
switch is not on.
A memory card is inserted in 
the digital picture frame but 
you cannot view your photos.
• Make sure that the memory card is one of the
supported formats and that the files on the card are 
JPEG images files.
• Turn your digital picture frame off and make sure
that the memory card is inserted all the way into the 
card slot and is inserted correctly.
• Turn the frame on. After a couple of seconds, you
should see your first photo.
• Note: Some digital cameras save images in formats
other than JPEG. Refer to your camera's manual if 
your photos are not JPEG files. 
The picture displays some 
pictures slower and some 
pictures faster.
Higher resolution pictures load more 
slowly. Try using lower resolution 
pictures or down sampling your 
images. See your camera's operating 
manual for details on down sampling 
your photos.
Photo format
JPEG
Memory card formats
Secure Digital™, Multi 
Media Card™, Compact 
Flash™, xD Memory Stick™, 
and USB Flash Drives
Panel size
9” diagonal
Power source
AC to DC adapter (9 V DC )
Power consumption
FCC/PSE (Adapter)
Operating temperature 41~90°F (5~35°C)
Weight
1.36 lb. (.62 kg)
Dimensions (W×H×D)
11.4 Ч 7.3 Ч 1.2 inches
(280 Ч 178 Ч 30 mm)
