Q3 Innovations AlcoHAWK ABI - Manual (Page 12)

ACCESSORIES
Visit our online store at www.q3ats.com to purchase the following
accessories.
• Mouthpieces
• 12 Volt DC Adapter
• Wall Adapter
• Soft Case
• Hard Case
• Wrist Strap
CALIBRATION
Calibration of the AlcoHAWK ® ABI occurs during manufacturing using
advanced alcohol simulation equipment. The manufacturer passing
known alcohol concentrations through the sensor to set baseline values
for testing. During testing, the unit compares users’ breath samples
to these baseline values. If the verification determines that the BAC is
not consistent with actual BAC levels, a technician calibrates the unit.
The accuracy of breath alcohol testers can fluctuate after six to twelve
months, depending on frequency of use and operating conditions.
If the unit is providing inconsistent results or unusually high or low read-
ings, the unit may need calibration. A technician should recalibrate
this unit at least every six to twelve months. Monthly calibrations
may be required if the unit is used daily.
Please visit www.q3i.com or call 888-399-1687 for calibration or support.
ONE-YEAR LIMITED WARRANTY
Q3 Innovations (Q3I) warrants this unit to be free from defects in
workmanship or material (excluding calibration) under normal use for
ONE (1) YEAR from the date of retail purchase by the original buyer
10