Q3 Innovations AlcoHAWK PRECISION - Manual (Page 9)

Error Message Cause and Course Of Action
reP
The unit is signifying to repeat the test because the
unit did not detect an even alcohol concentration
in the breath sample. This can occur if the user
varies the blowing force when performing a test or
if the Exhaust Port (see Components Diagram) is
obstructed. Repeat test.
H
The unit detected a very high alcohol concentration
(above 0.400% BAC).
Err
The sensor has been damaged and will need to be
returned for servicing. If this error message occurs
more than two consecutive times, please contact
Q3 Innovations for instructions to have your unit
serviced.
PRECAUTIONS
1. Wait at least 20 minutes after drinking, smoking or eating before
testing.
2. Do not test in strong winds or in a closed room with smoke or alcohol
present.
3. When the green light below PWR is blinking, replace the 9V alkaline
battery.
4. Do not blow smoke, food or liquid into the unit.
5. Only use the unit in a temperature range of 10 - 40°C or 50 - 104°F.
Operation above or below this range may affect the results.
6. Do not leave the unit connected to the AC/DC outlet when the unit is
not being used.
7