Progressive Turf Equipment 522427 - Manual (Page 2)

2
3. Mark the location of the second hole and drill
the 17/32” mounting holes.
4. On the wing decks were the corner pin is
located, mount the roller bracket in place using
the ½” x 1 ½” long bolt on the flat bar. The
formed corner of the roller bracket must be on
the outside, making it a right hand bracket.
5. Mount the brackets at all other locations with the ½ x 1 ¼” bolts and the backing plates.
6. Tighten all bolt securely.
1 ½” Long Bolt Right Hand Bracket
1 ¼” Long Bolt