Posiflex CR-6300 Series - Manual (Page 3)

Part 3
b). For CR-6314: The serial signal cable is already built on.
c). For CR-6315: USB cable is already built on.
5. Power Source depend on model
a). For CR-6310: not applicable
b). For CR-6315: Power adapter 12VAC 1.5A
c). For CR-6314: Power connector cable and I/O bracket plate.
INSTALLATION
CR-6310 Connect the drawer to POS system/printer as shown below:
CR-6314
1). Open the PC case. Put the
metal bracket with power
connector into one of the
I/O windows.
2). Connect the cable to the
IDE HDD type power
connector of PC power
supply. See illustration
below. Then close the PC
case.
3). Connect the DB-9
connector to the computer's serial COM port. Connect the 4P phone
plug connector to the added I/O bracket. See below illustration.
CASH DRAWER
With Printer Interface
8P Telephone Jack
8P Telephone Plug
6P Telephone Plug
Output to drawer
POS System or Printer
Ground
Rear View
Control signal input
616P PHONE JACK
POWER CORD
COM1
616P PHONE JACK
4PIN PHONE JACK
DB9