Posiflex CR-2200 Series User Manual
Page 3
Part 3
CARTON CONTENTS
1.
Cash drawer pre-assembled.
2.
User’s manual.
3.
Separators of coin compartment: 5 pcs.
4.
Key 2pcs: There is a key serial No. sticker on the cash drawer bottom
side. If user lost the key he/she can order the key according to this
number.
5.
Signal Cable depend on model
a). For CR-2200: The standard signal cable is 21863018010 which has a 8
pin modular plug at one end to connect to the cash drawer and a 6 pin
modular plug at the other end to connect to the POS system/printer.
This cable serves for most popularly used POS equipment such as
Posiflex POS terminals, all Posiflex POS printers, most Epson POS
printers, most Star POS printers and all other compatibles. The user
may cut the 6 pin end or order the ready cut cable CCBLA-180A and
assemble this free end according to his POS printer specification if the
POS printer used applies different connection. The cable connection on.
CCBLA-180A is as below:
Wire color
RJ45
Function
Red
Pin 1
Drawer open sense
Blue
Pin 2
Drawer open sense return
Green
Pin 7
+ 24V to solenoid
Yellow
Pin 8
Drawer kick pulse
b). For CR-2204: Serial signal RS232 DF9F RJ9 conversion cable
(21863259900/21863159900).
c). For CR-2205: USB cable (21863250800/21863150800)
6.
Power Source depend on model
a). For CR-2200: not applicable
b). For CR-2204: Power adapter 12VAC 1.5A
c). For CR-2205: Power adapter 12VAC 1.5A