Posiflex TX-5000 - Manual (Page 5)

CAUTION: On doing insertion or extraction of a cable
connector, please always hold the connector head
itself instead of pulling the cable wire. Doing this
could damage the cables and ports, which is
considered as an artificial damage and is not
covered by the warranty.
Note: The COM ports of TX-5000/5000E do not supply power by
default. To make the COM ports supply power, you can set
up the COM ports through the dedicated settings listed in
the table below.
TX-5000/5000E
COM1/2/3/4 COM5/6
5VDC 12VDC 5VDC 12VDC
BIOS Setting v
Jumper Setting v v v
The VGA port of TX-5000/5000E can supply +12VDC
power through system BIOS setting for Posiflex LCD
monitor. Nevertheless, except Posiflex peripheral device,
do not connect any other device to this port.
Installing Optional Peripheral Devices
Posiflex TX-5000/5000E can work with multiple optional
peripheral devices, such as LCD monitor, cash drawer and the
like.
Before installing an optional peripheral device, make sure that the
system is powered off and the external power source is removed
from the POS box to prevent electric hazard! Failure to follow the
warning description will void the product warranty!
For the detailed instruction, refer to the each of the user manuals
of the optional peripheral devices.
5