Posiflex TX-5000 - Manual (Page 4)

View of Rear I/O Interface of TX-5000/5000E
4
7 10 9 8
11
6
1
5 4 2 3
1 Wi-Fi antenna (optional) 2 USB 2.0 port
3 RJ45 LAN port 4 LPT port
5 COM port 6 12VDC-IN power jack
7 Display port 8
RJ11 cash drawer (CR)
port
9 VGA port 10 USB 3.0 port
11 Mic-in / line-out combo jack
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the
connector of power adapter and all of the connectors of required
I/O cables respectively to the 12VDC-IN power jack and
appropriate I/O ports. Please make sure that each of the cables is
fully connected to the correct port. Damages due to incorrect
connection or orientation are not covered by product warranty!
Some cable connectors like the connectors of COM or LAN or
cash drawer (CR) cables have to be gently inserted until a click is
heard. It is recommended that the I/O ports, such as COM port
and VGA port, should be screwed after the I/O cable connectors
are completely connected. And please make sure that each
connector has to be connected to the right peripheral device in the
right way.