Posiflex TX-2000 - Manual (Page 4)

4
CAUTION: On doing insertion or extraction of a cable
connector, please always hold the connector head
itself instead of pulling the cable wire. Doing this
could damage the cables, which is considered as
an artificial damage and is not covered by the
warranty.
Note: The COM ports of TX-2000 do not supply power by
default. To make the COM ports supply 5VDC or 12VDC
power, you can set up the COM ports through jumper
setting.
The VGA port of TX-2000 can supply +12VDC power
through jumper setting for Posiflex LCD monitor.
Nevertheless, except Posiflex peripheral device, do not
connect any other device to this port.
Installing Optional Peripheral Devices
Posiflex TX-2000 can work with multiple optional peripheral
devices, such as LCD monitor, cash drawer and the like.
Before installing an optional peripheral device, make sure that the
system is powered off and the external power source is removed
from the POS box to prevent electric hazard! Failure to follow the
warning description will void the product warranty!
For the detailed instruction, refer to each of the user manuals of
the optional peripheral devices.