Posiflex TX-2000 - Manual (Page 3)

3
View of Rear I/O Interface of TX-2000
1 Line out 2 USB 2.0 port
3 RJ45 LAN port 4 Dual DSub VGA port
5
COM (DB9) port
(COM 1 / COM 2)
6
COM (RJ50) port
(COM 3 / COM 4)
7 LPT Port 8 12VDC-IN power jack
9 RJ11 cash drawer (CR) port
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the
connector of power adapter and all of the connectors of required
I/O cables respectively to the 12VDC-IN power jack and
appropriate I/O ports. Please make sure that each of the cables is
fully connected to the correct port. Damages due to incorrect
connection or orientation are not covered by product warranty!
Some cable connectors like the connectors of COM (RJ50) or
LAN or cash drawer (CR) cables have to be gently inserted until
a click sound is given. It is recommended that the I/O ports, such
as COM (DB9) port and VGA port, should be fastened with
connector thumb screws after the I/O cable connectors are
completely connected. And please make sure that each connector
has to be connected to the right peripheral device in the right way.
2 3 4 5 6 7
1
8
9