Posiflex MT-4008W - Manual (Page 11)

11
7.
Fix the handstrap cover onto the
tablet with a screw.
Replacing the Handstrap Cover with a Pistol Grip
(Optional)
The pistol grip is a holder and scanner that can be provided with a
1D or 2D scan engine. Besides, the pistol grip is bound with a
battery pack that can supply power to the tablet when running out
of the power of its internal battery. To replace the handstrap
cover with a pistol grip, follow the steps listed below.
1.
Loosen and remove the screw from
the handstrap cover.
2.
Push the handstrap cover to the end
along the track in the direction
indicated by the arrow in the figure.
3.
Remove the handstrap cover from the
rear side of the tablet.
Note: To install the pistol grip onto the tablet and
check how much battery capacity remains, refer to
the section titled “Connecting the Pistol Grip
onto the Tablet (for MT-4008W/R)” as
described above.