AValon RF DX404 User Manual
Page 31
AVALON RF, INC.
Page 28 of 28
DX404/DX504/DX604 User’s Guide & Operating Manual
Appendix C – BIT Codes
BIT 0
- memory error (unit is useable but will not retain stored setting)
BIT 1-4 and combinations thereof – the numbers indicate which tuners are
unlocked (the unit needs to be returned to factory for repairs at the
earliest). Partial functionality can be achieved (until unit can be taken out of
service) by removing the unlocked tuner from the diversity temporarily
using the *1 command.
BIT 5
- I2C error. Unit is non-functional & must be sent back for
repairs.
BIT 6/