Posiflex IVA XT-3815 - Manual (Page 14)

Routing and Arranging Cables
For GEN 7E Base Stand
Before connecting cables, please follow the steps made below to
remove the cable cover from the GEN 7E base stand for routing
and arranging the cables.
1. Press section A with your thumb and
push against section B with your
forefinger.
2. Push down section A slightly with
your thumb and hold off section B
with your forefinger. Then, pull out
the cable cover.
3. Push and bend the main unit to the
end in the direction as shown by the
arrow.
4. With your forefingers, pull by force
the locking hook in the direction as
indicated by the arrow to remove the
neck cover from the base stand.
A
B
A
B
14