Posiflex JIVA XT-3915IR - Manual (Page 6)

Connecting Power Cable Connector to the Terminal
Before turning turn ON the terminal, connect the power cable
connector to the power jack of the terminal.
CAUTION: Before connecting the power cable to the power jack of
main unit, do NOT touch any metal pin of the connectors
or circuits to avoid high voltage hazard or electrostatic
discharge damage.
Powering ON the XT-3815/3915IR
After connecting the power cable to the
power jack of main unit, slightly push to
open the power button cover at the left
side of the main unit.
Then press the power button to power on
the main unit. To power it off, press the
button again.
Once powering off the system, if you want
to power it on again, please wait for at
least 3 seconds.
If the system hangs due to a reason, such as software resource
conflict, please press and hold the power button for 10 seconds
around to forcedly shut down the system.
6