Philco PHJE 5020 - Manual (Page 6)

4 Revision 06/2014 Copyright © 2014, Fast ČR, a. s.
EN
PART 3: INSTRUCTIONS FOR USE
Before fi rst use
1) Remove all packaging materials and marketing materials, which could prevent the use of the appliance.
2) Disassemble the appliance and thoroughly wash all removable parts using warm water with a neutral
detergent.
3) Wipe the motor unit with a soft, slightly damp cloth.
Assembling the appliance
Important notices:
Check that the silicone gasket seal (13) in the bottom part of the juice
collector (fi g. 1) is fi tted correctly. The silicone gasket seal must tightly
close off the pulp extractor, otherwise the resulting juice will contain
too much pulp. To clean the appliance again, it is necessary to again
remove the gasket seal.
13.
Fig. 1
1) Insert the pulp container (1) into the motor unit (2).
2) Seat the juice collector (4) on to the motor unit (2) and turn it in the clockwise
direction (fi g. 2).
Fig. 2