Dolby Laboratories RC2573GR - Manual (Page 32)

31
DVI Video can convert easily to HDMI with
a simple adaptor, but the audio signal is not
present and must then be connected to one
of the other inputs on the TV. This feature
allows you to match the DVI video to the
Audio signal you have connected. The ports
are distinguished from each other by 1 and 2.
SMARTPOWER LOW
SMART SOUND KEY SMART SOUND
DEFAULT HDMI 1 AUDIO AV AUDIO
LOW POWER STANDBY YES
LOUD SPEAKER MUTE NO
CHANNEL INSTALL
USB BREAK-IN NO
> SW DOWNLOAD
DEFAULT HDMI 2 AUDIO AV AUDIO
FEATURES
By default, the • LOW POWER
STANDBY option is set to NO.
If an interactive SmartCard is used
with the TV, set the LOW POWER
STANDBY option to NO.
SMARTPOWER LOW
SMART SOUND KEY SMART SOUND
DEFAULT HDMI 1 AUDIO AV AUDIO
LOW POWER STANDBY YES
LOUD SPEAKER MUTE NO
USB BREAK-IN NO
> SW DOWNLOAD
DEFAULT HDMI 2 AUDIO AV AUDIO
FEATURES
In the • LOUD SPEAKER MUTE
option, select YES to mute the TV
speakers permanently.
SMARTPOWER LOW
SMART SOUND kEY SMART SOUND
DEFAULT HDMI 1 AUDIO AV AUDIO
LOW POWER STANDBY YES
LOUD SPEAKER MUTE YES
CHANNEL INSTALL
USB BREAK-IN NO
> SW DOWNLOAD
DEFAULT HDMI 2 AUDIO AV AUDIO
FEATURES
When inserting a USB device, the •
channel will be automatically switched to
the USB directory using USB BREAK-
IN. Select YES to enable this option.
SMARTPOWER LOW
SMART SOUND KEY SMART SOUND
DEFAULT HDMI 1 AUDIO AV AUDIO
LOW POWER STANDBY YES
LOUD SPEAKER MUTE NO
CHANNEL INSTALL
YES
> SW DOWNLOAD
USB BREAK-IN
DEFAULT HDMI 2 AUDIO AV AUDIO
FEATURES
Software downloading and cloning
The SW DOWNLOAD feature allows you
to upload and download the TV software
and settings via USB or *RF. This includes
Cloning.
*Only available on certain models.
Select • SW DOWNLOAD.
SMARTPOWER LOW
SMART SOUND KEY SMART SOUND
DEFAULT HDMI 1 AUDIO AV AUDIO
LOW POWER STANDBY YES
LOUD SPEAKER MUTE YES
SW DOWNLOAD >
USB BREAK-IN YES
DEFAULT HDMI 2 AUDIO AV AUDIO
FEATURES
Press • Æ to enter SW DOWNLOAD
menu.
In the • SOURCE option, select either
USB or RF. USB is the default option.