Permasteel PG-40503S0L - Manual (Page 19)

16
ASSEMBLY INSTRUCTIONS
STEP VII: Side Burner:
„
Loosen side burner in side shelf. (B). To loosen, unscrew and remove two front
screws and washers holding sideburner in place. (A).Note: Do not loosen
electrode screw.
„
Remove knob and bezel from sideburner control valve. To remove, pull knob
straight out from valve stem. Unscrew bezel from valve face and set the two
screws aside.
„
Insert valve stem through hole in fascia.(C). Attach bezel to fascia and valve
face with previously removed 2 screws.(D)
„
Place sideburner tube over the valve, making sure that valve is inside
sideburner tube.(E)
„ Reattach sideburner to sideburner shelf with the 2 previously removed screws
and washers.
„ Push control knob onto sideburner valve stem.(F)
„ Replace sideburner grate.(G)
„ Connect both igniter wires to the igniter module on the inside of the right fascia.
To connect, push igniter wire tips onto pins in igniter module.(H)
„ Unscrew igniter cap from control panel. Insert (1) AAA battery (not provided) into
battery slot with positive end (+) facing outward. Screw igniter cap back onto
panel.(I)