Permasteel PG-40400S0L - Manual (Page 9)

6
ASSEMBLY INSTRUCTIONS
STEP II:
1. Take out side burner hose with attached side burner valve from inside grill cabinet,
through square opening of right side panel.
2. Remove the packing materials. Use the provided hexagon wrench (Allen) to
loosen (don’t remove) the setscrew on the control knob, and pull out the knob.
3. Remove the two M4*6 screws from front of side burner valve.
4. Remove the two screws on side burner bracket A, which attach side burner,
remove side burner, to allow side valve to be mounted.
5. From underneath side shelf, place side burner valve steam to go through opening
on front of side burner control panel. Attach and secure side gas valve to control
panel using the M4*6 screws.
6. Slightly insert Side Burner onto tip of gas valve make sure it’s centered. Replace
and tighten the two screws on bracket A.
7. Attach igniter wire with red sleeve to valve electrode.
8. Place and press control knob onto valve steam, and tighten the setscrew of knob.
VERY IMPORTANT: the knob must be removed first, otherwise the side
burner can’t be installed in next step.
1 2
3 4