Permasteel PG-40400S0L - Manual (Page 20)

17
1) Make sure the grill has been leak tested and is properly located.
2) Remove any packing material.
3) Light the grill burners using the instructions in this manual.
4) Turn the control knob to “HI” and preheat the grill for 15 minutes.
Cautions: Never leave the grill unattended when the grill is on.
5) The grill lid should be closed during the appliance preheat period.
6) Place the food on the grill and cook to the desired doneness. Adjust heat
setting, if necessary. The control knob may be set to any position between
“HI” and “LO”.
7) The grill is designed to grill efficiently without the use of lava rocks or
briquettes of any kind. Heat is radiated by the stainless steel flame tamers
under the cooking grids.
8) The hot grill sears the food, sealing in the juices. The longer the preheat, the
faster the meat browns.
OPERATING INSTRUCTION
WARNING
ELECTRICAL GROUNDING INSTRUCTIONS
This grill is equipped with a three-prong (grounding) plug, and should be plugged
directly into a properly grounded three-prong receptacle. Do not cut or remove the
grounding prong. Keep any electrical supply cords and the fuel supply hose away
from any heated surfaces. Remove and store the motor in a dry place when not use.
ƒ USING OPTIONAL ROTISSERIE KIT (AVAILABLE SEPARATELY)：
1) Take off the rotisserie kit from the grill.
2) Slide off the left fork, and load the meat or poultry onto the rod.
3) Restore the left fork, putting two forks into the meat or poultry as far as possible.
Make sure the meat or poultry is located in the middle of the rod. Screw the
wing nuts of the fork as tight as possible.
4) Wrap the food with butchers string (never use nylon or plastic string) to secure
any loose portions, if necessary.
5) Restore the rotisserie kit into the motor.
ƒ ROTISSERIE TIPS:
1) If larger cuts of meat are being grilled, the rod may flex. This is normal.
2) Remove the cooking grids for larger cuts of meat if the meat scrapes on the
cooking grids during rotation.