Paso Sound PDVD01U - Manual (Page 14)

1
TASCAM DV-D01UT/C
Basic operations
Changing the scan mode
The unit can be accommodated to your TV’s scan mode.
NOTE
To use the unit in the progressive mode, it is required that
the unit is connected to the TV by using an HDMI cable or a
component video cable (supplied). (See page 7.)
While DVD stopped
Press and hold PROGRESSIVE SCAN for 2
seconds.
Currently selected scan mode appears on the display
window.
Press Cursor
¥
/
˙
to select the desired
mode.
Each time you press the button, the scan mode changes as
follows:
When connecting the TV with the component video
cable:
For U.S.A./Canada
480i* Ĩ 480p*
For Europe
576i* Ĩ 576p*
For Asia
NT480i* Ĩ NT480p* Ĩ PAL576i Ĩ PAL576p
When connecting the TV with the HDMI cable
For U.S.A./Canada
AUTO Ĩ 480p* Ĩ 720p* Ĩ 1080i*
Ĩ (back to the beginning)
For Europe:
AUTO Ĩ 576p* Ĩ 720p* Ĩ 1080i*
Ĩ (back to the beginning)
For Asia:
AUTO Ĩ NT480p* Ĩ NT720p* Ĩ
NT1080i* Ĩ PAL576p* Ĩ PAL720p* Ĩ
PAL1080i* Ĩ (back to the beginning)
When selecting “AUTO”, the unit outputs the video
signal to get the best picture quality on your TV
according to the High-Definition video signal compat-
ibility of the TV.
When selecting “AUTO”, “1080i”, or “720p”, the unit
up-convert the SD signal to 1080i or 720p.
When “1080i” or “720p” is selected, the HD indicator
lights on the display window.
When “1080i” or “720p” are selected, the following
signals are out through the each output jack.
Component video jacks: NTSC 480p, PAL576p
S-video/composite video jacks: NTSC 480i, PAL 576i
480i, 480p, 576i, 576p, 1080i, and 720p indicate the
number of scanning lines and scanning format of a video
signal.
480i/576i/1080i indicates 480/1080 scanning lines with
interlaced format.
•
·
1.
2.
·
·
•
•
•
•
*
–
480p/576p/720p indicates 480/720 scanning lines with
progressive format.
Generally, you can get better picture quality by selecting
the larger the number of scanning lines.
You can get better picture quality in the progressive mode
than in the interlace mode.
Press ENTER while the selected mode
is displayed.
When the progressive mode is selected, the PROGRESSIVE
indicator lights on the display window.
NOTE
When selecting “1080i”, the picture shrinks vertically.
Changing the scan mode does not take effect when connecting
the TV with the S-video or video cable.
Although the picture may be distorted when you press
ENTER, this is not a malfunction of the unit.
There are some progressive TVs and High-Definition TVs
that are not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO in
the progressive scan mode. In such a case, change the scan
mode to the interlace mode. •
–
•
•
3.
•
•
•
See page 9 for button locations.