Dimplex KDS6401E User Manual
Page 8
cloth or paper towel. Do not use abrasive cleaners on glass surface or spray liquids directly
onto any surface.
contempra
ef
SURFACE CLEANING
Use warm water only to clean painted surfaces of the contempra
ef
. Do not use abrasive
cleaners on surface or spray liquids directly onto any surface.
TO REPLACE THE LIGHT BULBS
1. On the back of the contempra
ef
remove the screws from the light access cover.
2. Remove the light access cover.
4. Reach into the opening, locate and examine the bulbs to determine which bulb(s) required
replacement.
5. Unscrew the bulb(s) counter clockwise.
6. Insert new bulb(s).
7. Install the light access cover and install the screws
HELPFUL HINTS
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated
life. Group replacement will reduce the number of times you need to open the unit to replace
light bulbs.
BULB REQUIREMENTS
Quantity of 2 clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60 watt
rating. Example GE 60BC of Philips 60 CTC.
5