Pacific Cycles BIRDY Monocoque hinge adjustment - Manual (Page 3)

Birdy/Equinox: replacement of sleeve at folding hinge
P:\08_Anleitungen\Fahrradmontagen\GB-WORD-2002\BE Hülse austauschen-GB-2006-07-07.doc / Stand: 2006-08-24
Page 3 of 3
11. Close the lever and tighten the tension rod counter­
clockwise (2.5mm allen key) until tension rises.
12. Adjust the pressure point of the lever. The lever
should have its maximum force shortly before rea­
ching the end point (see picture below).
Turning the bolts in direction of the white arrows
changes to earlier pressure point. Turning the bolts
in direction of the black arrows changes to later
pressure point.
13. After adjusting the pressure point, the bolts M4x16
have to be tightened.
14. Assemble nut and washer. Hold the tension rod and
tighten the nut at the same time.
15. Check the tension of the cone and eventually adjust
the tension rod again.
At our homepage you find a movie file which shows the
modification of the folding hinge. You can download the
file at this adress:
www.r-m.de\huelse
For any technical problems you can call our production
manager Kay Tkatzik (++49-6151/36686-95).
For the rest of the world please contact your local distributor/dealer.