Osoto PH-9000 - Manual (Page 18)

☆ FAQ：
Question Answer
Re-connect the power supply cable.
Power is off. Please turn it on.
Re-connect the Audio/Video/RGB cable.
Check if the input/output connection is correct.
Adjust the resolution
No image,
No sound
Or you just forget to uncover the camera.
Maybe the object is too close to the camera.
Adjust the distance to more than 330mm.
The object is shiny or with strong reflective
surface. Please adjust the outer shine.
Image
unclear
Or the camera is dirty, please clean it.
Image
confusion
It’s because when zoom-in in a dark situation,
there will be confusion of the image. Please
turn on the upper light.
Maybe it is because of the shortness of light.
Turn on the upper light.
Image is
too dark
Or reset the brightness.
Control
panel
unworkable
Do not switch the buttons too speedily. Take a
stop before pressing the next button.
Make sure nothing is stocked between the
remote controller and the equipment.
Keep the remote controller within 500m.
Remote
controller
unworkable
Check if it is out of battery.
Check if the AV connection is correct.
Check if microphone is workable.
Microphone
soundless
Or the volume is now in the minimum position.
17