Osoto PH-9000 - Manual (Page 11)

☆ OP0ERATION：
SPLIT:
In the state of image saved already, press
“Division” to make 1/2 screen comparision between
the moving image and the machine saved image,
then press “Next” to make screen comparision between
moving image and the machine saved image.
Normal
Vertical L1/2
NEXT:
In the state of Preview, press “Next” to preview
circularly, and press “Next ” to save or delete images
by choosing ID .
SAVE:
Press “Save”, to save the current image to the
imag saving chip. Note: When images are full, and
there are more to be saved, the previous images would be
covered. Also images could be saved to the designated
position. Do it as followed :Before savimg, press the “Next” on
the remote controller, choose the position to be saved, then
press “Save” to save .
10