Drolet 75281 User Manual
Page 7
6
BRICKS AND INSULATION INSTALLATION (HT-1600)
1. Remove from the stove all bricks and insulation.
2. Install all side bricks (11 x 4 1/2" x 9" & 1 x 4 ½” x 8 3/16") as shown in drawing below.
3. Install the back bricks (6 x 4 1/2" x 9")
4. Install the bottom bricks (4 x 4 1/2" x 9") + (2 x 6 " x 8") and the ash cap.
5. Install the "T" shape support.
6. Install the baffle bricks (4 x 4 1/2" x 9") + (2 x 3" x 9") on T shape support.
7. Finally, gently slide the insulation panels over the baffle bricks.
Nbr. Description Qty
1
1 ¼” x 4 ½” x 9”
25
2
1 ¼” x 4 ½” x 8 3/16"
1
3
1 ¼” x 6” x 7"
2
4
ASH CAP (SE09224)
1
5
1 ¼” x 3” x 9"
2
6
ISOLATOR (9 ½" x 12" )
2
7 SUPPORT
(SE09242)
1
Figure 2: HT-1600 Refractory Bricks Assembly