Osburn OB01601 - Manual (Page 16)

16
7. INSTALLATION ON FACEPLATE: Attach the mitred corners of trim together using
the corner brackets. Slide the assembled trim over the edge of the faceplate. See Figures
8 and 9.
Attach the left and right sides to the top with corner brackets supplied. Slip the trim over
the faceplate and snap the eight faceplate trim clips in place (see Figure 8).
Figure 8
Figure 9
8.
Lift the insert into the fireplace. Square the insert to the face of the fireplace by
adjusting the levelling legs on the sides at the rear of the insert. Check that the throat
connector is in line.
9.
If there is space to push the connector down from above, do so. Reach in through
the insert and pull the throat connector down into place. If you are securing the connector
to the flue collar with the screw, do that now.