Orion System E-BUS Digital Room v.1 - Manual (Page 6)

E-BUS DIGITAL ROOM SENSOR
Operator Interface 6
Sensor Operation
Main Sensor Display Screens
There are 3 Main Sensor Display Screens. The fi rst screen displays the
Current Room Temperature, Operation Mode, Slide Offset, and RH (RH
is available on the OE217-03 Model). The second screen displays the
Outside Air Temperature and/or Humidity if Outdoor Air Temperature
and/or Outdoor Air Humidity is being monitored. The third screen
displays the unit information for the controller that the Digital Room
Sensor is connected to.
Temperature and Humidity Status
Screen
The Main Display Screen dis-
plays the current room tem-
perature, the humidity in the
room (RH is available on the
OE217-03 Model), the current
setting of the slide offset, and
an icon for the current mode of
operation once the controller it is
connected to is done calibrating.
The different icons shown are a
Snowfl ake for cooling mode, a
Flame for heating mode, a Fan in
motion for vent mode, and a Moon for unoccupied mode. When the unit
is in unoccupied mode, the screen’s background will turn dark. Refer to
Figure 9, page 7 for operation mode screen examples.
Figure 5: Main Display
Screen
Figure 6: Outdoor Status
Screen
Figure 7: Unit
Information Screen
Outside Air Temperature Humidity
Status Screen
If the connected controller is
receiving an outdoor air tempera-
ture and/or humidity broadcast,
touching
will fi rst
bring up the Outdoor Status
Screen.
Unit Information Screen
Touching again will
bring up the Unit Information
Screen which contains the con-
troller’s address or ID number,
screen ID, and software version
of the controller connected to
the sensor.