Onwa Marine Electronics KAP-833 - Manual (Page 9)

Engaging Power Steering Mode
Press the Power button. A beep will sound and the adjacent light will come
on. The rudder will move to the centre position.
Setting the rudder angle
The angle of rudder applied depends on the amount of rotation of the
course knob.
The maximum angle of rudder is controlled by the internal and external rudder
limit settings.
Power Steering Mode 4
Rotating the course control knob clockwise will move the rudder to
starboard. Rotating the course control knob anticlockwise will move the
rudder to port.
For information on power-steering with a remote unit (eg: Electric Wheel or
Steering Levers), see the section on remote units.
If your vessel requires counter-rudder while steering in auto mode, you may wish
to set the counter rudder control
1 (ie: disabled) while using power-steer.
4