Directed Electronics VIPER 5101 - Manual (Page 35)

27 © 2009 Directed Electronics. All rights reserved.
Programming options
Your system has many custom programmable options. Some may require instal-
lation labor. Ask your authorized dealer for details.
The following is a list of the programmable options, with the factory settings in
Bold.
Active • locking (remote only) and passive locking. The system automati-
cally locks the doors 30-seconds after the last door is closed. Auto
Re-lock automatically re-locks the doors 60 seconds after unlocking (if no
door is opened).
Locking/Unlocking with horn honk confirmations
• On or Off.
Ignition controlled door lock feature On or • Off: When this feature is pro-
grammed on, the doors lock three seconds after the ignition is turned on,
and unlock when the ignition is turned Off. The ignition lock and unlock
are independent features that can be programmed separately.
Panic mode enabled
• /disabled when the ignition is turned on or com-
pletely turned Off.
Comfort closure
• is a programming option which closes the vehicle’s
windows after remote locking. Note: Comfort closure can only be used
on cars that have the capability of closing the windows (and on some
cars the sunroof as well) with the key cylinder in the door.
Auto re-locking On/
• Off, ensures the vehicle stays locked if it is not
entered after unlocking by remote control. After unlocking by remote, the
system automatically re-locks the doors in 30 seconds. Open any point of
entry to stop the re-lock until the next unlock by remote.
One-time Bypass On/
• Off, can be used to temporarily bypass the Passive
locking operation for one cycle. It also bypasses the comfort closure and
auxiliary channel outputs programmed to activate when locking. After the
next unlock all operations return to normal.
Turn the ignition On for one to three seconds and then Off. The horn
honks once to confirm one-time bypass is enabled.