Olson Technology OTEN-4P-01 User Manual
Page 5
025-000502 Rev. X2
www.olsontech.com
2
TYPICAL PERFORMANCE WITH DIFFERENT SFP MODULES
Fiber Type
Max. Distance
Wavelength
Tx Power
Sensitivity
Link Budget
50µm Multimode
550m
850nm
-11 to -6dBm
<-18dBm
7dB
Single-mode
30km 1310nm
-8
to
0dBm
<-25dBm
17dB
Single-mode
80+km
1550nm, CWDM
-5 to 0dBm
<-25dBm
20dB
ELECTRICAL CHARACTERISTICS
Min.
Typ.
Max.
Units
Converter Power Requirements (See Note 1)
5
Volts
DC
140
mA
Power Supply Voltage
100 240
Volts
AC
50 60
Hz
Note 1) Using Model OTOLS-1312-30 SFP module.
ENVIRONMENTAL CHARACTERISTICS
Min.
Typ.
Max.
Units
Operating Temperature Range
0
+50
°C
Storage Temperature Range
-20 +70
°C
Humidity, RH, non-condensing
5 90
%
PHYSICAL CHARACTERISTICS
Min.
Typ.
Max.
Units
Weight
9.8
oz.
280
g
Weight with 2 SFP Modules
11
oz.
310
g
Dimensions
4.92 x 3.35 x 1.06
in.
125 x 85 x 27
mm
INSTALLATION
1) Insert the SFP modules into the SFP cages on the converter.
2) Attach a fiber cable from the SFP on the converter to the fiber network. The fiber connections must
match: transmit socket to receive socket.
3) Attach UTP cables from the TP network device to the RJ45 ports on the converter.
4) Connect the power supply to the converter and check that the Power LED lights up. The TP Act and
FX Act LED’s will light when all the cable connections are satisfactory.