Olson Technology OLRR - Manual (Page 2)

SAFETY WARNINGS
LASER RADIATION
The OLRT laser transmitter emits invisible radiation that can cause permanent eye
damage. AVOID DIRECT EXPOSURE TO BEAM. Operate the transmitter only with the
proper optical fiber installed in the transmitter optical connector. Power to the OLRT
transmitter should be turned-off or preferably, disconnected whenever the optical
connector cover is opened and there is no installed fiber (as when the fiber connector is
being installed or removed from the transmitter connector).
NEVER USE ANY OPTICAL INSTRUMENT TO VIEW THE OUTPUT OF THE
LASER TRANSMITTER. “OPTICAL INSTRUMENT” INCLUDES MAGNIFYING
GLASSES, ETC.
NEVER LOOK INTO THE OUTPUT OF THE LASER TRANSMITTER
NEVER LOOK INTO THE OUTPUT OF A FIBER CONNECTED TO A LASER
TRANSMITTER.
NEVER LOOK INTO OR USE ANY OPTICAL INSTRUMENT TO VIEW THE
DISTANT END OF A FIBER THAT MAY BE CONNECTED DIRECTLY OR VIA AN
OPTICAL SPLIT, TO A TRANSMITTER THAT MAY BE OPERATING. THIS
SPECIFICALLY APPLIES TO FIBERS THAT ARE TO BE CONNECTED TO
RECEIVERS (SUCH AS THE OLRR RECEIVER) OR OTHER DEVICES AT ANY
DISTANCE FROM THE LASER TRANSMITTER.
SHOCK HAZARD
The OLRT/OLRR is designed for indoor use only. Direct exposure to moisture must be
avoided.
Page 2