Northern Airborne Technology DA80 - Manual (Page 15)

SM57 Rev. 4.10 DA80 Series DigiVOX™ Digital Intercom Manual
2.4
Continued Airworthiness
Maintenance of the DA80 DigiVOX™ Digital Intercom is ‘on condition’ only. Periodic
maintenance of this product is not required.
2.5
Accessories Required
An installation kit is required to complete the installation. The DA80-IKC (crimp) is
supplied with the unit, and consists of the following:
DA80-IKC (crimp)
Quantity Description NAT Part #
1 Hole Overlay Drill Template 43-10-085
1 Front Label (Lexan) 43-41-080
1 Rectangular Black Faceplate (Blank) 50-04-851
1 Fluted Knob set (ICS) 40-21-ICS2
1 Fluted Knob set (VOX) 40-21-VOX2
3 CSK Black 6-32 Mounting Screws 25-11-028
1 D-min 25 pin Socket housing 20-21-025
25 MS Crimp Socket 20-26-901
1 Hood, D-min, Metal 20-28-028
2.6 Installation Drawings
DRAWING REV. DESCRIPTION TYPE Serial #’s
DA80-001
DA80\001\403-0 1.00 Digital Intercom Interconnect 1001 and up
DA80\001\405-0 1.00 Digital Intercom Connector Map 1001 and up
DA80\001\905-0 1.00 Digital Intercom Faceplate 1001 and up
DA80\001\920-0 1.00 Digital Intercom Mounting 1001 and up
DA80\001\922-0 1.00 Digital Intercom Mech. Installation 1001 and up
DA80-010
DA80\010\403-0 1.00 Digital Intercom Interconnect 1001 and up
DA80\010\405-0 1.00 Digital Intercom Connector Map 1001 and up
DA80\010\920-0 1.00 Digital Intercom Mounting 1001 and up
DA80\010\922-0 1.00 Digital Intercom Mech. Installation 1001 and up
Section 2 ends after these Drawings
Oct 13, 2004 Page 2-7
ENG-FORM: 805-0104.DOT
PROPRIETARY AND CONFIDENTIAL TO NORTHERN AIRBORNE TECHNOLOGY LTD.