Northern Airborne Technology AA22 - Manual (Page 12)

AA22 Series PA Driver/Siren Control
SM33-2 Installation and Operation Manual
Section 2 Rev: 1.00 Issue 4 Page 2-5
Siren Rate Siren Tone
Master Level
Figure 1: Tone and Rate Controls
2.6 Accessories Required But Not Supplied
Installation kit p/n AA20-IKC (crimp) is required to complete the installation.
AA20-IKC 25-pin D-min Female Crimp Kit (NAT Part No. D25SL-IKC) consists of
Quantity Description NAT Part No.
1 D-min 25 Socket Housing 20-21-025
25 MS Crimp Socket 20-26-901
1* Jack Screw Set 20-27-002
1* Lock Clip Set 20-27-004
1 50 Pin Connector Hood 20-29-026
* Use as required.
2.7 Installation Drawings
Use of the "#" symbol in the REV. column indicates that the document is listed elsewhere in the manual.
Refer to the applicable NAT Part No. to locate the referenced document.
DOCUMENT REV.
DESCRIPTION TYPE SERIAL NO.
AA22-110
AA22\110\403-0 1.02 PA Driver/Siren System Interconnect Up to 4019
AA22\110\403-0 1.10 PA Driver/Siren System Interconnect 4020 and up
AA22\110\405-0 1.02 PA Driver/Siren System Connector Map All
AA22\110\905-0 1.02 PA Driver/Siren System Faceplate Up to 4126
AA22\110\905-0 1.10 PA Driver/Siren System Faceplate 4127 and up
AA22\160\922-0 1.00 PA Driver/Siren System Mechanical Installation All
AA22-160
AA22\160\403-0 1.01 PA Driver/Siren System Interconnect Up to 2900
AA22\160\403-0 1.10 PA Driver/Siren System Interconnect 2901 and up
AA22\160\405-0 1.02 PA Driver/Siren System Connector Map All
AA22\160\905-0 1.02 PA Driver/Siren System Faceplate Up to 4126
AA22\160\905-0 1.10 PA Driver/Siren System Faceplate 4127 and up
AA22\160\922-0 # PA Driver/Siren System Mechanical Installation
ENG-FORM: 805-0115.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.