Northern Airborne Technology RS12 - Manual (Page 5)

INSTALL_OPS
MANUAL AMENDMENT
Manual: SM15 (RS12/RS24)
Amendment #: 1
Document # SM15\Install_Ops\809-0001 Amendment Date: May 12, 2005
Amendment #1 May 12, 2005 Page 1
ENG-FORM: 809-0109.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
The purpose of this amendment is to update Section 1.0 with environmental information
and descriptions of new products and add updated drawings and documents to and
remove obsolete drawings from Section 2.0
Amendment Instructions:
1 Remove Pages Replace With Pages
1-3 and 1-4 Rev. 4.00 1-3 through 1-5 Rev. 4.00 Amendment 1
2-1 through 2-3 Rev. 4.00 2-1 through 2-3 Rev. 4.00 Amendment 1
2 Remove Drawings (Section 2) Replace or add Drawings (Section 2)
RS12\020\403-0 Rev. 1.01 RS12\020\403-0 Rev. 1.02
RS12\020\403-1 Rev. 1.01 RS12\020\403-1 Rev. 1.02
RS12\030\403-0 Rev. 1.01 RS12\030\403-0 Rev. 1.02
RS12\030\403-1 Rev. 1.01 RS12\030\403-1 Rev. 1.02
RS12\350\403-0 Rev. 1.00
RS12\350\403-0 Rev. 1.01
RS12\020\405-0 Rev. 1.01 RS12\020\405-0 Rev. 1.02
RS12\020\922-0 Rev. 1.02 RS12\020\922-0 Rev. 1.04
RS24\020\922-0 Rev. 1.02 RS24\020\922-0 Rev. 1.03
RS12\521-0 Rev. 1.10
RS24\521-0 Rev. 1.10
Note: Ensure that all drawings are inserted in the order shown on the latest drawing lists.
3
Update the Amendment Record sheet at the front of the manual.
4
Insert this page into the manual after the Amendment Record sheet (page ii).
Manual Amendment ends after the following amended pages