R 2.4, 3 control, 4 3g/hd -sdi specifications – Nevion VikinX Sublime series Rev.G User Manual
Page 8
VikinX Sublime Optical Routers
Rev. G
nevion.com | 8
2.3 Control
Standard Features:
Serial port:
RS-232 for protocol conversion, to VikinX compact control
protocol, or to third party protocols.
Connector:
DE9, D-sub 9-pin female.
NCB ports:
For integration with VikinX compact router configuration.
Connectors (2):
RJ45 (1 In / 1 Out)
Ethernet port:
10/100BaseT Ethernet bus for external router control.
Connector:
RJ45.
Synchronization:
-
Analog Black&Burst, looped. Both PAL and NTSC
supported.
-
Tri-Level, Looped. For HD signal formats only.
-
Distribution of synchronization signals between
several routers.
Connector(s):
BNC.
Optional Features:
Control Panel:
-
Optional, built-in control panel available.
-
External control panels available.
2.4 3G/HD -SDI specifications
Supported formats:
Broadcast:
-
270Mbps
– 2.97Gbps;
-
2K, 2048x1556/23.98 and 24.
Supported standards:
SD-SDI, 270Mbps:
SMPTE 259M.
HD-SDI, 1.485Gbps:
SMPTE 292-2008.
3G-SDI, 2.97Gbps:
SMPTE 424M.
DVB-ASI:
EN50083-9.
Fiber transmission:
SMPTE 297-2006.
Optical signal inputs:
Optical Interface:
Nevion dual receiver SFP. See separated SFP datasheet
for specification
Optical signal outputs:
Optical Interface:
Nevion dual transmitter SFP. See separated SFP
datasheet for specification
Electrical signal inputs:
Connectors:
BNC, IEC 61169-8.
Impedance:
75 Ohm.
Return loss:
-
> 15dB (5MHz-1.485Ghz);
-
> 10dB (1.5GHz
– 3GHz).