6 connection details – Nevion VikinX Sublime Series Rev.AB User Manual
Page 12
VikinX Sublime 3G/HD/SD-SDI Routers
Rev. AB
nevion.com | 12
Connector:
75 ohm BNC female, loop-thru.
Return loss:
>40dB (100 kHz
– 5 MHz);
>35dB (5-10 MHz).
Signal format:
NTSC or PAL Black&Burst or HD Tri-Level according to
SMPTE 274M, SMPTE 276M.
Signal level:
Nominal 1.0Vp-p.
Field selectivity:
Field 1.
Timing range:
-
SD, PAL: within clock-intervals (27MHz) 565
– 835
line 6
-
SD, NTSC: within clock-intervals (27MHz) 565
–
835 line 10.
-
HD Tri-Level: 1280x720: within clock-intervals
(148.5MHz) 455
– 780 line 7
-
HD Tri-Level: 1920x1080: within clock-intervals
(148.5MHz) 625
– 1070 line 7.
2.6 Connection details
The Sublime routers have the following service connections on the rear of each product:
Figure 1: Sublime service connectors.
SYNC:
Synchronization signal (in). Black burst/composite/tri-level sync
reference input with passive loop-through for vertical interval
switching.
LOOP:
Synchronization signal (out). Loop-through of SYNC input.
NCB IN:
Network Control Bus Input. The protocol of this bus is described in a
separate manual.
NCB OUT:
Network Control Bus Output.
ETHERNET:
10/100Base-T Ethernet bus for external router control.
RS 232:
RS-232 for external control protocols.
POWER A:
±15VDC power socket.
POWER B:
±15VDC power socket, redundant supply.
CONFIGURATION:
Configurations switch. See Chapter 3 for further descriptions.