Nevion DA-VA - Manual (Page 6)

DA-VA Rev. H
nevion.com | 6
3
Connections
The DA-VA has a dedicated connector module: DA-VA-C2. This module is mounted at
the rear of the sub-rack. The module is shown in figure 2. This backplane replaced the
DA-VA-C1 backplane with the feature upgrade of incorporating the passive loop on the
backplane. Figure 3 shows the discontinued DA-VA-C1 backplane.
Figure 2: Overview of the DA-VA-C2 connector module (default backplane).
Figure 3: Overview of the DA-VA-C1 connector module (Discontinued).