Nevion DA-VAEQ-6 - Manual (Page 5)

DA-VAEQ-6 Rev. B
nevion.com | 5
2
Specifications
2.1 Electrical Input
Maximum input 1 V p-p
Equalization Tunable up to 300m of Belden 8281 or equal.
Coupling DC
Impedance 75 ohm (switchable to high impedance)
Connector 2x BNC connected in parallel (1 input + 1 loop)
2.2 Electrical Output
Number of outputs 6
Connector BNC
Impedance 75 ohm
Signal polarity 6 non inverting
2.3 Analog video
Noise bandwidth, -3dB
Formats 0 to 10 MHz (useful for AES-3id)
Standard definition video
Return loss > 35dB 0-10MHz
Video S/N ratio > 70 dB
Differential gain < 0.3%
Differential phase < 0.3º
Gain adjustment +/-3dB
Freq. response 0 dB ± 0.3 dB 0- 6 MHz
2.4 Electrical
Power +5V DC / 3 W,
±15V DC / 3 W
Control Control system for access to setup and module status with
BITE (Built-In Test Equipment) for use with GYDA Control
System