Nevion DA-AES - Manual (Page 6)

DA-AES Rev. J
nevion.com | 6
3
Configuration
The DA-AES supports either single 1 input to 8 outputs or dual two inputs to 4 outputs.
SW1-1 SW1-2 SW1-3 Function
Off Off On AES1 input to AES1 outputs,
AES2 input to AES2 outputs
Off On On AES1 input to AES2 outputs,
AES2 input to AES1 outputs
On Off On AES1 input to AES1 and AES2 outputs
On On On AES2 input to AES1 and AES2 outputs
X X Off Gyda controls the setting
DIP switch SW1-4 is reserved for future options.
When DIP switch 1-3 is on, LEDs should blink when DIP switch 1-1 or 1-2 is changed.
Figure 2: DA-AES board layout