Nevion AV-HD-XMUX - Manual (Page 23)

AV-HD-XMUX (-T/R) / AV-SD-XMUX (-T/R) Rev. L
nevion.com | 23
5 Operation
Figure 10: LED overview
(Text not printed on the front panel). Each module has 4 LED’s. The colors of each of the
LED’s have different meanings as shown in the tables below.
5.1 Front panel LEDs
AES status LEDS show information decided by DIP switch 2.7.
Diode \ state Red LED Orange LED Green LED No light
Card status PTC fuse has been
triggered or FPGA
programming has
failed or laser has
failed
Module has
not been
programmed
Module is OK Module has no
power
SDI input
status
Video signal
absent.
Electrical
video signal
present
Optical video
signal Present
Module has not
been programmed
AES1&2
status Switch
2.7 off
AES 1 & 2 inputs
not present
Either AES
input 1 or 2
present
AES input
signals 1 & 2
present
Module has not
been programmed
AES3&4
status Switch
2.7 off
AES 3 & 4 inputs
not present
Either AES
input 3 or 4
present
AES input
signals 3 & 4
present
Module has not
been programmed
AES1&2
status Switch
2.7 on
Group 1 & 2 not
present
Either group 1
or 2 present
Both group 1
& 2 present
Module has not
been programmed
AES3&4
status Switch
2.7 on
Group 3 & 4 not
present
Either group 3
or 4 present
Both group 3
& 4 present
Module has not
been programmed
Card status
Input status
AES1& 2 status
AES3& 4 status
AV-HD-XM UX