Nevion AV-HD-XMUX - Manual (Page 13)

AV-HD-XMUX (-T/R) / AV-SD-XMUX (-T/R) Rev. L
nevion.com | 13
The configuration assigns sources to output groups and AES output pairs. This allows the
same input signals to be routed to several outputs.
There is a group of three switches for each of the outputs. The combination of the three
switches set the input source or disables the output e.g.

Group 1 embedded output is controlled by switches on SW1 positions 1, 2 and 3.

AES outputs 3&4 are controlled by switches on SW3 positions 4, 5 and 6.
3.1.2 Sources
There are eight possible permutations of the switches. Seven of the permutations choose the
input sources. One of the settings (off, off, off) is used to disable the group embedding or set
the AES outputs to silence.
Switch # 1 or 4 2 or 5 3 or 6
Output disabled Off Off Off
Group 1 Off Off On
Group 2 Off On Off
Group 3 Off On On
Group 4 On Off Off
AES 1 & 2 On Off On
AES 3 & 4 On On Off
Stereo tone On On On
Table 2: Source switch encoding
3.1.3 Examples
Figure 3: Example 1
The module above (Figure 3) is set to the following:

Group1 output is embedded with signals from AES1&2 inputs (On,Off,On).

Group2 output is embedded with signals from AES3&4 inputs (On,On,Off).

Group3 output is embedded with signals from de-embedded group3 (Off,On,On).

Group4 output is not embedded (Off,Off,Off).

AES1&2 outputs signals from de-embedded group1 (Off,Off,On).