Nevion AAV-HD-XMUX - Manual (Page 8)

AAV-HD-XMUX(-T/R)/ AAV-SD-XMUX(-T/R) Rev. G
nevion.com | 8
2 Specifications
2.1 Measurement conditions
Audio Sampling rate: 48 kHz.
Ambient temperature: 25ºC.
2.2 General
Power: +5V DC 0.7A 3.5W
+/-15V DC 0.017A 0.5W
Control: DIP switches, GYDA system controller.
Monitoring: Front panel LEDs, GYDA system controller and GPI.
EDH/CRC processing: Full. Received flags are updated, new CRCs are
calculated.
Boot time: 1.2 second.
Digital audio inputs and outputs: Conform to AES3-2003.
Video inputs and outputs: Conform to SMPTE 292M-1998.
Data input and output: Conform to EIA RS-485.
2.3 Processing
Video latency is variable due to the de-glitcher but the values below apply when the video
signal is first applied. Other latency values are maximum values.
2.3.1 SD latencies
Video: des+4+350+256+2+ser video samples = 45.3us.
Audio embedding: AES+2+1+16 audio samples=20/48000 = 417us.
Audio de-embedding: 4+16+1 audio samples =21/48000 = 438us.
Embedding data GPI mode: 8+4+32 96kHz samples =44/96000 = 458us.
Embedding data UART mode: 32+128+17+16 96kHz samples =193/96000 = 2.01ms.
De-embedding data GPI mode: 8+32+8 96kHz samples =44/96000 = 458us.
De-embedding UART mode: 8+32+8 96kHz samples =48/96000 = 458us.
2.3.2 HD latencies
Video: des+8+1024+1024+3+ser video samples = 27.6us.
Audio embedding: AES+2+1+8=12 /48000 = 250us.
Audio de-embedding: 2+8+1=11/48000 = 229us.
Embedding data GPI mode: 8+4+16 96kHz samples =28/96000 = 292us.
Embedding data UART mode: 16+128+17+16 96kHz samples =177/96000 = 1.84ms.
De-embedding data GPI mode: 4+16+8 96kHz samples =28/96000 = 292us.
De-embedding UART mode: 4+16+8 96kHz samples =28/96000 = 292us.
2.4 Inputs
2.4.1 Electrical video input
AAV-HD-XMUX
Video Data rate: 270Mbps or 1,485Gbps.
Video frame rate: 24p, 50i, 60i, 50p or 60p and pull down rates
PsF formats are handled as interlaced formats.
AAV-SD-XMUX
Video Data rate: 270Mbps.
Video frame rate: 50i and pull down 60i rates.
Equalization: Automatic up to 35dB.
Impedance: 75 ohm.