Nevion AES-VMUX - Manual (Page 18)

Configuration 18
AES-VMUX/-SFP User Manual Rev. G
6.3.3 System address planning
The number of timeslots in the multiplex used by the module depends on the number of input
ports in the module.
It is up to the user to ensure that the addressing is consistent and timeslots are not overwritten
(unless this is intended).
6.4 Method
1. First define the port directions on each module.
2. Arrange each site so that the modules with de-multiplexing channels come first in the
SDTI chain.
3. Assign the addresses to the modules with multiplexing channels.
4. Assign the addresses to the modules with de-multiplexing channels.
Most configurations will be simpler than the last two examples here.
6.5 Examples
Figure 6.2 Key to example graphics