Daewoo DDQ-9H1SC User Manual
Page 14
28
27
TIME SETTING
CLOCK
You can set the television’s clock so that the current time will be displayed when you press the
TV MENU button.
You must set the current time before you can set the automatic On/Off timer.
Press TV MENU button and move the
cursor to TIME by CH /
buttons.
Press VOL + or
button and press it
again.
Adjust "HOUR " by CH /
buttons.
Whenever these buttons are pressed,
the hour increases or decreases by 1.
Press VOL + or
button and adjust
"MINUTE " by CH /
buttons.
Whenever these buttons are pressed,
the minute increases or decreases
by 1.
Press the TV MENU button to return
to the main menu.
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
TIME
CLOCK
AM12:00
SLEEP
OFF
TIMER
OFF
ON TIME
AM12:00
OFF TIME
AM12:00
ON CHANNEL
2
: ADJ.
: MOVE
: PREV.
WHITE
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE ENGLISH
: MOVE
: SELECT
: EXIT
GREEN
TIME
CLOCK
AM12:00
SLEEP
OFF
TIMER
OFF
ON TIME
AM12:00
OFF TIME
AM12:00
ON CHANNEL
2
: ADJ.
: MOVE
: PREV.
GREEN
WHITE
SOUND ADJUSTMENT
MTS
USING MTS BUTTON :
Your TV set incorporates an MTS (Multichannel Television Sound) decoder to receive stereo
broadcasts and any accompanying SAP (Second Audio Program) such as another language
sound track).
1. Press the MTS button
Depending on the audio signal type of the currently receiving broadcast, on-screen selection
appears as follows:
The "STEREO", "SAP" text indicate that MTS mode is being broadcast.
When the power is switched on or channel is changed, the "STEREO", "SAP" text are
automatically displayed, depending on the current broadcast.
NOTES
If the received signal is weak, noise may be heard.
In such a case, press MTS button to set to the MONO mode for better sound reception.
If the received SAP signal is weak, the SAP will not be heard.
Even if both STEREO and SAP broadcasts are received, both broadcasts cannot be
heard at the same time.
Transmission of CABLE TV signals may differ from off-air TV broadcasts.
MTS STEREO
STEREO
SAP
MONO
Stereo and SAP
Stereo or SAP
Mono
STEREO
MONO or SAP
MONO
Receiving signal
On-screen selections
MONO only