Nevion 3GHD-OE-2-SFP - Manual (Page 5)

3GHD-OE-2-SFP Rev. C
nevion.com | 5
2
Specifications
2.1 General
Power +5V DC / 3.5W, max
Control Control system for access to setup and module status with
BITE (Built-In Test Equipment)
Temp. range 0 to +40 °C
2.2 Optical Inputs
Number of inputs 2
Transmission circuit fiber Single mode 9/125um
Connector LC/UPC, single mode
Optical wavelength ~1260-1620nm
Optical sensitivity See manual for installed SFP
Optical overload See manual for installed SFP
Detector damage threshold See manual for installed SFP
2.3 Electrical Outputs
Number of outputs 6 (3 per converter)
Connector BNC
Impedance 75 ohm
Return loss >15dB @ 5-1485MHz
>10dB 1485-2970MHz
Peak to peak signal level 800mV +/- 10%
Signal polarity 1 inverting, 2 non-inverting (per converter)
2.4 Standards
Supported standards for electrical and optical ports:
SMPTE292M, SMPTE259M, SMPTE297M, SMPTE305.2M, SMPTE310M, SMPTE424M,
DVB-ASI EN50083-9.