Nevion 3GHD-EO - Manual (Page 14)

3GHD-EO / 3GHD-EO-2 Rev. E
nevion.com | 14
4 MADI transport
The card can be used to transport MADI signal. Nevion recommend setting the cable EQ and
rec-clocker in bypass.
4.1 Connections
The 3GHD-EO and 3GHD-EO-2 has a dedicated connector module: 3GHD-EO-2-C1. This
module is mounted at the rear of the sub-rack. The module is shown in the figure below.
Figure 12 Connector module for 3GHD-EO-2
4.2 Terminal format support
The different input and output ports on 3GHD-EO(-2) can support a number of formats. The
table below show which signal formats are supported on the selected terminals.
Terminal format support for single converter:
Terminal Function Supported Format Mode
OPT1
Optical output SDI, DVB-ASI,
SMPTE310, Transparent Output
OPT2 Not used
I/O1
I/O2 Electrical Input SDI, DVB-ASI,
SMPTE310, Transparent Input
O1
O2 Electrical Output
Reclocked DA output SDI, DVB-ASI, Transparent Output
O1
––
O2
––
Electrical Output
Reclocked DA inverted
output SDI, Transparent Output
GPI ALARM Open Collector Alarms Wired alarms OC Output