Dvi6000 firmware update instructions – MultiDyne DVI-6000 Series User Manual

Page 20

Text mode
Original mode

Instruction Manual, DVI-6000 FTX/FRX

DVI6000 Firmware Update Instructions

Connect the DVI6000 unit(s) you wish to update to your PC using USB cable(s) and open the
DVI6000 GUI. When the GUI first opens, it should appear similar to the image below.

If there are no devices listed in the Detected Devices List, make sure the DVI6000’s are
powered up and connected via USB cables. Then go to the Tools Menu and select Refresh
Device List.