Dvi6000 usb driver installation – MultiDyne DVI-6000 Series User Manual
Page 15
Instruction Manual, DVI-6000 FTX/FRX
15
DVI6000 USB Driver Installation
NOTE: You must install the GUI software before plugging a DVI6000 into a USB Port in
order for Windows to find the driver file that is required. Failure to do so may cause
system corruption.
Connect a DVI6000 to the PC using a USB Type “A to Mini-B” cable. Windows should now start
its Found New Hardware Wizard.
Select “No, not at this time” when asked to connect to Windows Update to search for the USB
driver software. The DVI6000 USB driver software was installed as part of the GUI installation.
Click Next.